View 2SD2696_533628.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2SD2696
Transistors
Low frequency transistor (for amplification)
2SD2696
Structure NPN Silicon Epitaxial Planar Transistor External dimensions (Unit : mm)
VMT3
Features 1) The transistor of 400mA class which went only with 2012 size conventionally is attained in 1208 size. 2) Collector saturation voltage is low. VCE (sat) : max. 300mA at IC = 100mA / IB = 2mA
(1) Base (2) Emitter (3) Collector
(3)
0.2
0.22
(1)(2)
0.8 1.2
0.4 0.4 0.8 0.13 0.5
Abbreviated symbol : UH
Applications Switching
Packaging specifications
Package Type 2SD2696 Code Basic ordering unit (pieces) Taping T2L 8000
Inner circuit
(3) Collector
(1) Base
Absolute maximum ratings (Ta=25C)
Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Power dissipation Junction temperature Range of storage temperature Symbol VCBO VCEO VEBO IC ICP 1 PD 2 Tj Tstg Limits 30 30 6 400 800 150 150 -55 to +150 Unit V V V mA mA mW / TOTAL C C
0.2
1.2 0.32
(2) Emitter
1 Pw=10ms, Single pulse 2 Each terminal mounted on a recommended land.
Electrical characteristics (Ta=25C)
Parameter Symbol BVCEO BVCBO BVEBO ICBO IEBO VCE (sat) hFE fT Cob
Collector-emitter breakdown voltage Collector-base breakdown voltage Emitter-base breakdown voltage Collector cut-off current Emitter cut-off current Collector-emitter saturation voltage DC current gain Transition frequency Output capacitance
Min. 30 30 6 - - - 270 - -
Typ. - - - - - 120 - 400 3.0
Max. - - - 100 100 300 680 - -
Unit V V V nA nA mV - MHz pF
Conditions IC=1mA IC=10A IE=10A VCB= 30V VEB= 6V IC=100mA, IB= 2mA VCE=2V, IC=100mA VCE=2V, IE= -100mA, f=100MHz VCB=10V, IE= 0A, f=1MHz
1/1
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1

▲Up To Search▲

Price & Availability of 2SD2696

	To Download 2SD2696 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .